Montages and the logic of localisation

Each channel is the difference between two inputs. The montage says which electrodes are paired. Reading with one montage is like looking into a room through a single window: a finding should be confirmed in different montages.

Bipolar montage: look for phase reversal

Neighbouring electrodes are connected as a chain. The electrode where the field is most negative is shared by two channels, so one channel deflects downward and the next upward. This phase reversal points to the source. A source at the end of a chain shows no reversal, so pay extra attention to the ends.

Fp1-F3F3-C3C3-P3P3-O1Deflections point together: F3
A field most negative at F3: in a bipolar chain, the deflections of the two channels sharing that electrode point towards each other.

Referential montage: look for the highest amplitude

Each electrode is read against a common point. The source lies at the electrode with the highest amplitude. The problem is the reference itself: an earlobe can pick up a temporal spike and carry a false signal into every channel without a source.

Strengths and weaknesses of montages
MontageStrengthPoint of caution
Longitudinal bipolarFocus localisation, phase reversalWidespread waves look small
Transverse bipolarMidline and left-right comparisonAnterior-posterior spread is poorly seen
Ear referenceAmplitude comparison, distributionReference contamination
Common averageShowing wide distributionsA large spike distorts the average and creates opposite deflections
LaplacianSmall, narrow-field sourcesReduces widespread activity